Need help?Do you have a question about the Power Fist 10 in. Bench-Top Drill Press and is the answer not in the manual?
General| Motor Power | 1/2 HP |
|---|---|
| Table Size | 7-5/8 in. x 7-5/8 in. |
| Weight | 34 lbs |
| Chuck Size | 1/2 in. |
| Swing | 10 in. |
| Speed | 5 Speeds |
| Spindle Travel | 2 in. |
| Drill Chuck | 1/2 in. |
| Motor | 120V, 60 Hz |
| Table Tilt | 45 degrees |
| Drilling Capacity | 1/2 in. (steel) |
Explains hazard notices like DANGER, WARNING, CAUTION, and NOTICE for user understanding.
Details on required safety gear like goggles, face shields, and gloves for safe tool operation.
Instructions for securely attaching the drill press to a stable workbench or structure.
Procedure for connecting the main column to the base unit using bolts and washers.
Steps for attaching and securing the table support structure to the column.
Guide for mounting the headstock assembly onto the drill press column.
Instructions for installing the feed handles or bars onto their designated seat.
Detailed steps for cleaning, inserting, and securing the drill chuck onto the spindle.
Essential steps and warnings before performing any operational procedures on the tool.
Instructions for cleaning the external surfaces, air vents, and motor of the drill press.
To Next Page
