The Pro-Solder 50 is a 50W rechargeable soldering kit designed for various soldering and heat shrink applications. This portable device offers convenience and flexibility due to its rechargeable nature, eliminating the need for a constant power outlet during use.
Function Description:
The primary function of the Pro-Solder 50 is to provide a portable heating element for soldering and heat shrinking tasks. It is equipped with interchangeable tips, allowing it to perform different functions:
- Soldering: The device heats up a soldering tip to melt solder, creating electrical connections between components or wires. It can be used with both point and chisel soldering tips, catering to different soldering needs.
- Heat Shrink: With a dedicated heat shrink tip, the Pro-Solder 50 can be used to apply heat to heat shrink tubing, causing it to contract and provide insulation or protection for wires and connections.
Important Technical Specifications:
- Weight: The device weighs 100 grams, making it lightweight and easy to handle.
- Power: It is a 50W soldering iron, indicating its heating capability.
- Charging Time: A full charge takes approximately 3.5 hours.
- Running Time:
- When used as a soldering iron, it provides approximately 35 minutes of continuous operation.
- When used for heat shrink applications, it offers approximately 25 minutes of continuous operation.
- Max Temperature: The Pro-Solder 50 can reach a maximum temperature of 600°C (1112°F), suitable for most common soldering tasks.
- Charging Cable: It comes with a 100 cm USB to Micro-USB charging cable, allowing it to be charged via a wall charger or computer port.
Usage Features:
- Rechargeable: The device is rechargeable, offering cordless operation and enhanced portability. Charging is done via a Micro-USB port located at the end of the soldering iron. An indicator light turns green when fully charged.
- Easy Operation: To operate, the soldering iron switch is slid to the ON position, and the power button is pressed and held. An LED light illuminates to indicate that the iron is on.
- Quick Heating: The tip reaches its working temperature in about 10 seconds, allowing for efficient work.
- Interchangeable Tips: The kit includes point soldering, chisel soldering, and heat shrink tips, providing versatility for different applications. A brass tip cleaner is also included to maintain tip cleanliness.
- Safety Stand: A safety stand is provided to securely rest the hot soldering iron when not in use, preventing damage to surfaces and reducing burn hazards.
- Adjustable Tip Direction: The direction of the tip can be adjusted by rotating the black knurled nut, offering ergonomic flexibility during use.
- Included Solder: The kit comes with 10 grams of lead-free solder, providing a starter supply for immediate use.
Maintenance Features:
- Tip Replacement: Tips can be easily replaced. Ensure the soldering iron switch is in the OFF position and the tip has cooled completely. Unscrew the old tip by rotating the translucent locking nut counterclockwise, then screw in the new tip clockwise until it snaps into the lock position. It's crucial to align the notch on the housing when installing a new tip.
- Genuine Replacement Tips: The manual emphasizes using only genuine replacement tips to ensure proper function and safety.
- Tip Cleaning: The included brass tip cleaner helps maintain the cleanliness of the soldering tips, which is essential for effective soldering. Excess solder should be removed with a damp soft rag or sponge.
- No Filing: Users are explicitly instructed not to file the tip, as this can damage it.
Safety Warnings:
The manual highlights several critical safety warnings:
- California Proposition 65 Warning: The product may contain or produce chemicals known to cause cancer, birth defects, or other reproductive harm when used for soldering.
- Electrical Shock Hazard: Do not use the soldering iron if the housing is cracked or damaged, and never use it in wet areas. Do not attempt to repair or modify the device. Always de-energize the device being soldered.
- Burn Hazard: The hot tip can cause severe burns. Do not touch the tip of the tool and allow it to cool completely before handling or replacing the protective cap.
- Work Environment: Work only in dry areas and areas free from flammable materials.
- Storage: Store the soldering iron in a dry place, out of reach of children, and away from anyone who has not read the instructions.
- Personal Protective Equipment: Always wear eye protection and gloves when operating the soldering iron.
- Tip Handling: Never touch the tip of a hot soldering iron or attempt to remove solder from the tip with bare hands.
- Water Systems: Do not use the device in the fabrication or repair of potable water service systems.
- Resting the Iron: Always rest the soldering iron where its heat cannot damage nearby items.
- Power Off: Ensure the switch is in the OFF position when the iron is not in use.
- Cool Down: The tip remains hot for several minutes after use. Ensure it is cool before storing. Never leave the soldering iron unattended.
- Battery Safety: Do not disassemble or modify the battery. Damaged batteries can generate heat, rupture, or ignite.
The Pro-Solder 50 is a comprehensive and user-friendly tool for both hobbyists and professionals requiring a portable soldering and heat shrink solution. Its rechargeable nature, quick heat-up time, and interchangeable tips make it a versatile addition to any toolkit, provided all safety guidelines are strictly followed.
Need help?
General
To Next Page