Power Team SPXFLOW RWP55 - Pump and Cylinder Safety; Air Driven Motor Power Supply Safety

Form No. 102977
Rev. 2 Jun. 02, 2022
3© SPX FLOW, Inc.
Safety Precautions Continued
Pump
• Do not exceed the PSI hydraulic pressure rating noted on the pump nameplate or tamper
with the internal high pressure relief valve. Creating pressure beyond rated capacities can
result in personal injury.
• Before replenishing the oil level, retract the system to prevent overlling the pump reservoir.
An overll can cause personal injury due to excess reservoir pressure created when the
cylinders are retracted.
Cylinder
• Do not exceed the rated capacities of the cylinders. Excess pressure can result in personal
injury.
• Do not set poorly balanced or o󰀨-center loads on a cylinder. The load can tip and cause
personal injury.
Power Supply (Air Driven Motor)
• Disconnect air supply when pump is not in use or when breaking any connection in the
hydraulic system.
• A shut-o󰀨 valve or quick disconnect should be installed in the air line to the pump unit.
Close the shut-o󰀨 valve before connecting the air line to the pump.