PowerBass S-10T User Manual

Autosound "S THIN" Series Subwoofer
Application & Enclosure Guide
Please read through this manual to familiarize yourself with your new speakers. Should your PowerBass
Autosound speaker components ever require service, you will need to have the original dated receipt.
S-10TD
S-12TD
S-10T
S-12T

PowerBass S-10T Specifications

General

Size	10 inches
Impedance	4 ohms
Frequency Response	30 Hz - 500 Hz
Mounting Depth	5.25 inches
Type	Subwoofer
Enclosure Type	Sealed / Ported

Summary

PowerBass Autosound S Thin Woofer Features

Wiring Guidelines

Dual Voice Coil Wiring

Explains parallel and series wiring configurations for dual voice coil subwoofers.

Single Voice Coil Wiring

Illustrates standard, parallel, and series-parallel wiring for single voice coil subwoofers.

Installation Experience

Choosing a Speaker Enclosure

Discusses selecting the right enclosure type for optimal subwoofer performance and sound quality.

Box Construction

Subwoofer Crossover Setting

Preparing for Installation

Installation Precautions

Parameters for PowerBass S Thin Series Woofers

Recommended Enclosures

S-10T Enclosure Recommendations

Specifies optimum sealed volume, F3 cutoff, poly-fill usage, Qtc, and acceptable volumes for the S-10T.

S-10TD Enclosure Recommendations

Specifies optimum sealed volume, F3 cutoff, poly-fill usage, Qtc, and acceptable volumes for the S-10TD.

S-12T Enclosure Recommendations

Specifies optimum sealed volume, F3 cutoff, poly-fill usage, Qtc, and acceptable volumes for the S-12T.

S-12TD Enclosure Recommendations

Specifies optimum sealed volume, F3 cutoff, poly-fill usage, Qtc, and acceptable volumes for the S-12TD.

PowerBass Autosound Limited Warranty Policy