PowerFlow 1600 Series - User Manual

1600 Series Intelligent Electropneumatic
Valve Positioner
1600 Position controller
1601 Process controller
1602 Position controller(Profibus-DP)
l Compact stainless steel design
l Electrical waterproof connectors
l LCD with backlight
l Easy to start-up
l Rich additional software functions
1600 series intelligent electro-
pneumatic valve positioner is
designed for integral pneumatic
control valve, particularly suitable
for angle seat valves and diaphr-
agm valves.
The product is easy to operate and
has rich software functions.
It can easily be operated via the
LCD and keypad.
The positioner adjusts the valve
position quickly and accurately
through detecting the position
sensor signal.
Technical data
Material
PC、PA6-GF30、Stainless Steel、SI
Power supply
24V DC ±10%
Set-point signal
(1600/1601)
0/4-20mA or 0-5/10 V
Input resistance for set-
point signal
(1600/1601)
240Ω at 0/4-20mA, 21KΩ at 0-5/10V
Control medium
Dust concentration
Particle density
Pressure condensation
point
Oil concentration
neutral gases, air DIN ISO 8573-1
Solid particle size and density Class 3
Dew point Class 3
Oil content Class 3
Ambient temperature
0-70°C
Pneumatic connection
Plug-in hose connector G1/4(internal
Φ6mm
Electrical connection
M12 3-pins B-coded(cable ø 4-6mm)
M12 4-pins D-coded(cable ø 4-6mm)
M12 5-pins A-coded(cable ø 4-6mm)
Supply pressure
3~7 bar, specific values depending on
the actuator
Air flow rate
17 l/min(input pressure of 0.6Mpa)
58 l/min(input pressure of 0.6Mpa
,only single-acting)
Stroke control range
Line 5-50mm
Angle 90°
Installation
As required, Preferably with actuator in
upright position, Screw
Protection class
IP66
Power consumption
<5W
Explosion-proof class
(1600/1601)
Ex nA II C T4

PowerFlow 1600 Series Specifications