T
Tina ChristianAug 1, 2025
What to do if my Powerhorse M157711C.1 Pressure Washer has low or surging pressure?
- JJohn HopkinsAug 1, 2025
If your Powerhorse Pressure Washer exhibits low or surging pressure, or if there's no water flow, consider these potential causes and solutions: * Ensure you have an adequate water supply. * Check and clean the pump inlet filter. * Verify that you are using the correct high-pressure nozzle. * Inspect the nozzle for any blockages and remove them. * If the nozzle is worn, replace it. * Examine the pressure hose for leaks, and replace the hose if necessary.