EasyManua.ls Logo

PowerItUp PBC-3012 - Portable Use; Portable Charging Operation; Troubleshooting; Device Not Charging

Default Icon
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
When away from the car:
Insert a USB cable into the USB connector on the unit and into your
phone (or other device).
Press the Power button on the Car Charger Power Bank. (LEDs indicate
current charge level for a few seconds and then disappear, but your
device will continue charging.)
TROUBLESHOOTING
Q: I disconnected my Car Charger Power Bank from the car. How come it’s
not charging my device and the lights aren’t turning on?
A: Make sure you pressed the power button.
Q: The charger states that it’s got a 3000 mAh battery, and my phone has a
3000 mAh battery. I tried to charge my phone from a dead state and only got
to 70% before the PBC-3012 ran out of power. What’s going on?
A: All portable power banks have some level of eciency that’s lost during the
reverse charging process. It is typically about 30% under most conditions.