Need help?Do you have a question about the Powermat PM-IMGTS-210S and is the answer not in the manual?
General| Input Phase | 1 |
|---|---|
| Input Frequency | 50/60 Hz |
| Output Current Range | 10-210 A |
| Duty Cycle | 60% |
| Efficiency | 85% |
| Insulation Class | F |
| Protection Class | IP21S |
| Model | PM-IMGTS-210S |
| Welding System Type | Inverter |
| Welding Process | TIG/MMA |
Covers key safety regulations for operating a semi-automatic welding machine.
Covers specific safety warnings for device operation and handling.
Details measures for protecting against electric shock hazards.
Guidelines to reduce electromagnetic field build-up in the workplace.
Advice for individuals with heart conditions regarding welding.
Explains the impact of HF radiation on electronic equipment and mitigation methods.
Discusses electromagnetic interference from arc welding and how to minimize it.
Description and labeling of components on the front panel of the welding machine.
Details and labeling of components on the back panel and second view of the front panel.
Guide to selecting the welding method (MIG, MMA, TIG-Lift).
Options for selecting shielding gas for MIG/MAG welding.
How to select the wire diameter for MIG/MAG welding.
Details on gas shield selection for MIG/MAG welding (2T, 4T, VRD).
Using buttons for wire feed and gas flow testing.
Explanation of the control knob and its functions for welding parameters.
Understanding the meaning of the LED displays for voltage, alarm, and current.
Important guidelines and requirements for safe and effective operation.
Essential preparatory steps to take before beginning welding operations.
Advice on optimizing welding performance and techniques.
List of actions strictly forbidden during welding operations.
Essential tasks to perform after completing welding work.
Instructions for safely connecting and disconnecting the device from the mains.
Step-by-step guide for loading the electrode wire into the feeder.
Procedure for safely shutting off and managing shielding gas cylinders.
Guidance on selecting parameters and settings for MMA welding.
Instructions for setting parameters for MIG-MAG welding in manual mode.
Requirements and connection steps for performing TIG-Lift welding.
General overview of coated electrode welding (MMA) and arc principles.
Guidance on practical aspects of welding with coated electrodes.
Explanation of electric arc behavior and safety for eyesight.
Factors to consider when choosing the correct welding electrodes.
Recommended body and hand positions for effective welding.
Tips and warnings for successfully initiating the welding arc.
Guidance on maintaining the optimal arc length for quality welds.
Advice on achieving proper welding speed for different materials.
Steps and materials needed for hands-on welding practice.
Information on common steel types used in welding and their properties.
Identification and causes of porosity, narrow welds, and other welding flaws.
Technical specifications for preparing joints for MIG/MAG welding.
Explanation of the GMA welding process using various gases and metals.
Detailed advice on techniques, speed, and arc control for MIG/MAG welding.
Describes methods of metal transfer in the arc based on shielding gas.
Information on different protective gases and their applications in welding.
Guidelines for maintaining and storing the welding equipment.
Details on authorized service centers and repair procedures.
Information on warranty coverage and conditions for exclusion.
Instructions for environmentally friendly disposal of electrical equipment.
Contact information and website of the manufacturer.
Statement confirming the product's compliance with relevant standards.
To Next Page
