Powerplus POWXG90400 - Page 8

POWXG90400 EN
Copyright © 2021 VARO P a g e | 8 www.varo.com
Nozzle partially blocked
Clean the nozzle with a needle and
by spraying water backwards
through the nozzle
Water filter blocked
Clean the filter
Hose kinked
Straighten out hose.
Machine often starts
and stops by itself
Pump and/or trigger gun is
leaking
Contact your nearest service centre
No water supply
Connect inlet water.
Machine starts but
no water comes out
Water filter blocked
Clean the filter
Nozzle blocked
Clean the nozzle with a needle and
by spraying water backwards
through the nozzle