Powtran PI500-S Series - Page 81

Appendix II
77
Appendix II
0004: Constant speed overcurrent
0005: Acceleration overvoltage
0006: Deceleration overvoltage
0007: Constant speed overvoltage
0008: Control power failure
0009: Undervoltage fault
000A: Inverter overload
000B: Motor Overload
000C: Input phase loss
000D: Output phase loss
000E: Module overheating
000F: External fault
0010: Communication abnormal
0011: Contactor abnormal
0012: Current detection fault
0013: Motor parameter auto tunning fault
0015: Parameter read and write abnormal
0016: Inverter hardware fault
0017: Motor short to ground fault
001A:Running time arrival
001B: Custom fault 1
001C: Custom fault 2
001D: Power-on time arrival
001E: Load drop
001F: PID feedback loss when running
0028: Fast current limiting timeout
0029: Switch motor when running fault
002B: Motor overspeed
002D: Motor overtemperature
005C: Initial position error
Data on communication failure information description (fault code):
Communication fault address
Fault function description
8001
0000: No fault
0001: Password error
0002: Command code error
0003: CRC check error
0004: Invalid address
0005: Invalid parameters
0006: Invalid parameter changes
0007: System locked
0008: EEPROM in operation