Powtran PI500-W Series - Y1 Group -Fault Inquiry

Chapter 5 Function parameter
45
Chapter 5
area 1
12:Upload parameter to keyboard storage
area 2
21: Download the parameters from
keyboard storage 1 area to the storage
system 3
22: download the parameters from
keyboard storage 2 area to the storage
system 3
334
y0.01
User password
0 to 65535
0
☆
335
y0.02
Function parameter
group display selection
Units digit: d group display selection
0: Not displays 1: Displays
Tens digit: E group display selection(the
same above)
Hundreds digit:b group display
selection(the same above)
Thousands digit:y group display
selection(the same above)
Tens thousands digit:L group display
selection(the same above)
11111
★
336
y0.03
Personality parameter
group display selection
Units digit:User’s customization
parameter display selection
0:Not display 1:Display
Tens digit :User’s change parameter
display selection
0:Not display 1:Display
00
☆
337
y0.04
Function code
modification properties
0: Modifiable
1: Not modifiable
0
☆
5-1-18.y1 group -Fault inquiry
No.
Code
Parameter name
Setting range
Factory
setting
Cha
nge
338
y1.00
Type of the first
fault
0: No fault
1: Inverter unit protection
2: Acceleration overcurrent
3: Deceleration overcurrent
4: Constant speed overcurrent
5: Acceleration overvoltage
6: Deceleration overvoltage
7: Constant speed overvoltage
8: Control power failure
9: Undervoltage
10: Inverter overload
11: Motor Overload
12: Input phase loss
13: Output phase loss
14: Module overheating
15: External fault
16: Communication abnormal
17: Contactor abnormal
18: Current detection abnormal
19: Motor self-learning abnormal
-
●
339
y1.01
Type of the second
fault
-
●
340
y1.02
Type of the third(at last) fault
-
●