Powtran PI9000-S Series - Appearance and Installation Holes Size; Dimensions; PI9100 Series

Chapter2.Standard Specifications
13
2-3.Dimensions
2-3-1.Appearance and installation holes size
2-3-2.PI9100 series
1. 9S2 to 9S4
b
W
a
L
H
d
d
WARNING
Refer to the operation manual when adjust or inspect.
High voltage inside.Maintenance by the well-trained
personnel.
Confirm the output or control Confirm the output or
control wires are not grounded.
Perform parts replacement after discharge.
1) 9S2
操作面板
上盖板
活动盖板
控制电缆入口
整机固定孔
防护密封片
安装位(可选)
普传变频器铭牌
风道进风口
Top cover plate
Operation panel
Sealing guard
mounting position
(optional)
Fixing holes
Nameplate
Movable cover plate
Control cable inlet
Air duct inlet