Chapter3.Keyboard
21
For asynchronous motors
If the motor can NOT completely disengage its load, please select 1 (asynchronous
motor parameter static auto tunning) for b0.27, and then press the RUN key on the
keyboard panel.
If the motor can completely disengage its load, please select 2 (asynchronous
motor parameter comprehensive auto tunning) for b0.27, and then press the RUN key
on the keyboard panel, the inverter will automatically calculate the motor’s following
parameters:
b0.06:asynchronous motor stator resistance
b0.07:asynchronous motor rotor resistance
b0.08:asynchronous motor leakage inductance
b0.09: asynchronous motor mutual inductance
b0.10: asynchronous motor no-load current
Complete motor parameter auto tunning
To Next Page
Loading...
