Powtran PI9000-S Series - Chapter 5 Function Parameter; Menu Grouping

23
第
十
章
Chapter 5 Function parameter
5-1.Menu grouping
Note:
“★”: In running status, can not modify the parameter setting
“●”: The actual testing data, can not be modified
“☆”: In stop and run statuses, both can be changed;
“▲”: “Factory parameter”, no change about it.
“_” means the factory parameter is related to power or model. Please check the details in the
involved parameter introduction.
Change limit refers to whether the parameters are adjustable.
y0.01 is used for parameters protection password. Parameter menu can be enter into only after
inputting the right password in the function parameter mode or user change parameter mode. When the
y0.01 set to 0, the password is canceled.
F group is the basic function parameters,E group is to enhance function parameters, b group is a
function of motor parameters,d group is the monitoring function parameters.
PI9000-S series inverter , some parameters for the "factory reservations ", the serial number is not
listed in the function parameter list , resulting in some of the parameters in the table number is not
connected . Please do not attempt to modify the parameters which is not introduced in the manual , to
avoid errors.
Code
Parameter name
Functional Description
Referenc
e page
d0
Monitoring function
group
Monitoring frequency, current, etc
24
F0
Basic function group
Frequency setting, control mode etc
26
F1
Input terminals
group
Analog and digital input functions
28
F2
Output terminals
group
Analog and digital output functions
33
F3
Start and stop
control group
Start and stop control parameters
37
F4
V/F control
parameters
V/F control parameters
38
F6
Keyboard and
display
key and display function parameters
setting
39