1: restore the factory setting, not including motor parameters
After y0.00 is set to 1, most of the inverter function parameters are restored to the
factory default parameters, but motor parameters, frequency command decimal point
(F0.02), fault recording information, cumulative running time , cumulative power-on
time and cumulative power consumption will not be restored.
2: clear history
To clear the history of the inverter's fault recording information, cumulative running
time , cumulative power-on time and cumulative power consumption
3: restore default parameter values including motor parameters
4: backup current user parameters
Backup the parameters set by the current user. Backup all function parameters. It is
easy to restore the default settings when user incorrectly adjust parameters.
501, Restore user backup parameters
Restore previous backup user parameters.
10: Clear keyboard storage area
Empty keyboard storage area 1 and keyboard storage area 2
11: upload parameter to keyboard storage area 1
Upload the parameters of the inverter to keyboard storage area 1
12: upload parameter to keyboard storage area 2
Upload the parameters of the inverter to the keyboard storage area 2
21: download the parameters from keyboard storage 1 area to the storage system
Download the parameters from keyboard storage 1 to inverter
22:download the parameters from keyboard storage 2 area to the storage system
Download the parameters from keyboard storage 2 to inverter
To Next Page
Loading...
