Powtran PI9000-S Series - Page 60

Chapter5.Function parameter
56
otherwise can not view and modify the function parameters, please keep in mind the set
user password.
When y0.01 is set to 0, the set user password will be cleared, the password protection
function is invalid.
y0.02
Function parameters
display properties
Units
digit
d group display selection
11111
★
Not display
0
Display
1
Tens
digit
E group display selection
Not display
0
Display
1
Hund
reds
digit
b group display selection
Not display
0
Display
1
Thou
sands
digit
y1 group display
selection
Not display
0
Display
1
Tens
thous
ands
digit
L group display selection
Not display
0
Display
1
y0.03
User Parameters
display
Units digit:
Reserved
Tens digit :User’s change
parameter display selection
0:not displays
1:displays
00
☆
y0.04
Function code
modification
properties
Modifiable
0
0
☆
Not modifiable
1
User can set whether function code parameter can be modified or not, so as to
prevent the risk that function parameters are altered unexpectedly.
If the function code is set to 0, all function code can be modified; while it is set to 1, all
function code can only be viewed, can not be modified.