J
Jill CollinsSep 12, 2025
What should I do if Powtran PI9000-S displays Err.22?
- JJennifer JenkinsSep 12, 2025
To resolve Err.22 on your Powtran Inverter, eliminate overvoltage fault and eliminate overcurrent fault.
To Next PageTo Next PageWhat should I do if Powtran PI9000-S displays Err.22?
To resolve Err.22 on your Powtran Inverter, eliminate overvoltage fault and eliminate overcurrent fault.
How to clear Err.15 on Powtran PI9000-S Inverter?
To clear Err.15 on your Powtran Inverter, reset run.
General| Power Range | 0.75kW~630kW |
|---|---|
| Cooling Method | Forced air cooling |
| Enclosure Rating | IP20 |
| Output Voltage | 3-phase 0~Input Voltage |
| Control Mode | V/F control |
| Protection Functions | Over-current, Over-voltage, Under-voltage, Overload, Short circuit, Phase loss |
| Communication | RS485, Modbus RTU, CAN |
| Overload Capacity | 150% for 60 seconds, 180% for 10 seconds |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20℃~+60℃ |
| Humidity | 5%~95%, without condensation |
| Altitude | Below 1000m, derating if altitude exceeds 1000m |
| Input Voltage | 3-phase 380V (304~456V) |
Steps for checking the inverter after unpacking and verifying its contents.
Detailed safety measures for installation, wiring, and operation to prevent hazards.
Table detailing inverter models, input voltage, power, current, and adaptive motor specs.
Comprehensive list of standard specifications covering control, frequency, and protection.
Procedure for automatically tuning motor parameters for optimal control.
Overview of the commissioning process, including parameter setup and initial checks.
Parameters related to inverter fault detection and protection settings.
Parameters for configuring motor characteristics and settings.
Table detailing fault codes, possible causes, and recommended solutions.
Illustrates main circuit and control circuit wiring connections for the inverter.
