Powtran PI9000 series User Manual

Chapter 5 Function parameter
175
initialization
Restore the factory
parameters, not
including motor
parameters
1
Clear history
2
Restore default
parameter values,
including motor
parameters
3
Backup current user
parameters
4
Restore user backup
parameters
501
Clear keyboard
storage area
3
10
upload parameter to
keyboard storage area
1
3
11
upload parameter to
keyboard storage area
2
3
12
download the
parameters from
keyboard storage 1
area to the storage
system
3
21
download the
parameters from
keyboard storage 2
area to the storage
system
3
22
1: restore the factory setting, not including motor parameters
After y0.00 is set to 1, most of the inverter function parameters are restored to the
factory default parameters, but motor parameters, frequency command decimal point
(F0.02), fault recording information, cumulative running time , cumulative power-on time
and cumulative power consumption will not be restored.
2: clear history
To clear the history of the inverter's fault recording information, cumulative running
time , cumulative power-on time and cumulative power consumption
3: restore default parameter values including motor parameters
4: backup current user parameters
Backup the parameters set by the current user. Backup all function parameters. It is
easy to restore the default settings when user incorrectly adjust parameters.
501, Restore user backup parameters
Restore previous backup user parameters.
10: Clear keyboard storage area
3
Empty keyboard storage area 1 and keyboard storage area 2
3
11: upload parameter to keyboard storage area 1
3
Upload the parameters of the inverter to keyboard storage area 1
3

Powtran PI9000 series Specifications

General

Brand	Powtran
Model	PI9000 series
Category	Inverter
Language	English