2231V104-UK 5
HOW TO DISMANTLE SYSTEM 2200
Picture 1:
The back panel of the device is detached
from the housing by way of a screw-
driver.
Picture 2:
After this, the back panel can be pulled
out together with the PCB, but please
notice the position of the PCB as there
is a number of different positions
in the house. Do not pull the wires
unnecessarily, instead pull the PCB.
Switches and jumpers can now be
moved. When assembling the back
plate and housing, please make sure
no wires are stuck.
To Next Page
Loading...
