Do you have a question about the Practical Devices T110 and is the answer not in the manual?
Brand | Practical Devices |
---|---|
Model | T110 |
Category | Headsets |
Language | English |
Connects incoming telephone line plug from wall jack.
Used to dial outgoing calls.
Adjusts incoming voice volume.
Indicator light when phone is off hook.
Used to get dial tone or answer incoming calls.
Used for call waiting or with PBX systems.
Jack for supervisor's headset plug.
Redials the last number dialed.
Insert plug from headset cord into this jack.
Places the call on mute.
Indicator light when on mute.
Toggles between PULSE or TONE dialing.
Allows setting flash timing to 98, 300 or 600 mS.
Adjusts the loudness of the ring tone.
Adjustable for optimum fit and comfort.
Volume adjusts using volume control.
Plugs into jack (9) on Practica T110 Telephone.
Plug used at the end of cord to plug into unit.
Attaches to clothing to keep headset properly seated.
Adjustable boom positions mic for voice clarity.
Stabilizes headset on your ear.
Describes headset with dual receivers.
Risk of electric shock from lightning during electrical storms.
Avoid high volumes for extended periods to prevent hearing loss.
Discontinue use and contact Plantronics if skin irritation occurs.
Keep product away from children due to choking hazards from small parts.
Plug the modular telephone line cord into the wall jack and the phone.
Insert the headset cord plug into the designated jack on the phone.
Wait 10 seconds for the telephone to initialize before first use.
Adjust headband and boom mic for clear voice communication.
Put on headset, press Talk Button, dial number, and hang up.
Press Talk Button to answer, then press again to hang up.
Press the mute switch to mute both agent and supervisor.