Need help?Do you have a question about the PRAXIS WETBENCHSX Series and is the answer not in the manual?
Attaching the midtray to the left and right slanted legs using M4X6 lowhead screws.
Mounting HDD or SSD drives onto the mid tray using specified nylon screws.
Securing the back PSU bracket to the power supply unit.
Installing an optical drive using M4x8 nylon screws, or disregarding if not used.
Mounting drive brackets onto the midtray using M4x8 nylon screws.
Installing 12mm motherboard standoffs and M3 motherboard screws to the tray.
Placing motherboard and securing it with M3 nuts, then installing the GPU bracket.
Attaching the motherboard tray to the front of each leg using M4x6 lowhead screws.
Mounting the back radiator bracket to each leg using M4x6 lowhead screws.
Information on radiator tray capacity for internal and external radiator installations.
Attaching the AIO/radiator bracket to the motherboard tray side using M4x6 screws.
Attaching the midtray to the left and right flat legs using M4X6 lowhead screws.
Mounting HDD or SSD drives onto the mid tray using specified nylon screws.
Securing the back PSU bracket to the power supply unit.
Installing an optical drive using M4x8 nylon screws, or disregarding if not used.
Mounting drive brackets onto the midtray using M4x8 nylon screws.
Installing 12mm motherboard standoffs and M3 motherboard screws to the tray.
Placing motherboard and securing it with M3 nuts, then installing the GPU bracket.
Attaching the motherboard tray to the front of each leg using M4x6 lowhead screws.
Mounting the radiator bracket to each leg using M4x6 lowhead screws.
Information on radiator tray capacity for internal and external radiator installations.
Attaching the AIO/radiator bracket to the motherboard tray side using M4x6 screws.
Connecting the power switch cord to the NC and C prongs of the vandal switch.
Connecting the remaining cables to the NO and C prongs for the reset function.
Mounting 16mm vandal switches securely to the right or left leg of the wetbench.
Attaching the radiator bracket to the bay brackets, with options for vertical adjustment.
Attaching the fan arm to the fan bracket and then to the motherboard tray.
To Next Page
General