Precision Planting RowFlow 20/20 - Page 3

955205_01 11/11 3
Safety Informaon
Always wash your hands aer working on or around agricultural equipment prior to
eang, drinking, smoking, chewing, etc…
Always use the proper Personal Protecve Equipment (PPE) for any task.
Examples include: Gloves when handling sharp or abrasive materials
Eye protecon when handling contents or systems under pressure (ie.
Hydraulic, Pneumac, Water)
Welding helmet, Welding gloves, and welders clothing when welding/
torching
Prior to working under or at ground level of any equipment secure the machinery from
movement; accidental user operaon or simple rolling of equipment. This should
involve Lock-Out tags at the baery, removal of the Ignion key, “Do Not Operate” signs
placed at key locaons, as well as wheel chocks as necessary.
When working on a vehicle or implement’s hydraulic system, suspended components
may suddenly drop. If you are working on or around the implement at this me serious
injury could result. If possible lower the implement or aachment to the ground
before beginning any work. Alternavely; use mechanical lock-up devices to secure any
components in their lied posions.
Agricultural equipment may have been exposed to many types of chemicals. Any
chemicals or residues should be removed from the planter prior to beginning work.
Obey all exisng (new & original) warning signs and cauon labels on all equipment.
When working on or around equipment that has been or is running many components
may get extremely hot. To avoid injury &/or serious burns allow all equipment
components to properly cool before working on or around them.
Avoid wearing loose or ragged clothing or jewelry around equipment, with special
aenon to avoid moving parts.
Route and secure all wires and connecons to avoid crimping or damaging. This may
result in unexpected shortages and shocks.
Use extreme cauon when working on pressurized systems (Air, Water, Oil). Relieve all
pressure from a system before disconnecng lines, ngs, etc… Use a cloth or other
obstrucon to divert possible spray when disconnecng hose connecons, ngs, ll
caps, breathers, etc. Always use gloves, NEVER use bare hands. To locate or check for
leaks use cardboard, never your hand.
Electrical components and devices may contain high voltages and should be kept dry
and closed. There are no serviceable components in this unit. Do not open this display
unit, the AirForce Module, Row Flow Module, or the Smart Connector. Opening of the
covers should be done by, or with guidance from trained personnel.