©Copyright FARMpos Pty Ltd 2010
9.0 Calculating Areas using GPS
Suggested uses are, calculating paddock areas, disease, pest infections areas, areas of soil
loss etc.
To calculate areas using the GPS:
1. Return to MAIN MENU
2. Ensure TRACKS is highlighted and press ENTER
3. Press MENU
4. AREA CALCULATION should be highlighted. Press ENTER.
5. START should be highlighted. Ensure you are at the start of the area you wish to
calculate. Press ENTER.
6. Walk or drive around the area of interest.
7. You do not have to return exactly to the location you started. But remember you are
calculating an area, so to ensure accuracy, you should return close to where you
began. STOP should be highlighted. Press ENTER.
To Next Page
Loading...