PrecisionTemp PT-200FT - Page 62

Rev 8/2014
PrecisionTemp, Inc • 11 Sunnybrook Drive • Cincinnati, Ohio, 45237 • 1-800-934-9690 •
fax 513-641-0733 62
Part # Part Description
1019 Spark Ignition Probe
1024 3/8" Modulating gas valve PT-56 NG
1073 PT-56 Solenoid Valve LPG (Maxitrol)
1092 3/4" NG Modulating Gas Valve Assy, PT-200FT NG
1101 3/4" NG Modulating Gas Valve Assy PT-200 LPG OR
1119 3 AMP Circuit Breaker
1436 T-in Thermistor (blue wires) Assembly Kit
1437 T-out Thermistor (red wires) Assembly Kit
1854 Assembly T-Mid (1210) and CPI (1014)
1465 3 Gallon Water Tank Stainless Steel Tank for PT-56
1467 3/8" Modulating gas valve PT-56 LPG
1473 PT-56 3/4" Pressure relief valve 215F, 150 PSI
1496 Power wire harness to control board
1570 PT-56 Solenoid Valve NG (Maxitrol)
1613 110 VAC to 24 VDC Power Supply (regulated, 40 watt (1.7 A))
1615 RELAY, 110 VAC Circuit, 12 VDC Control
1616 Pressure Switch normally open, 1/4 WCI Vacuum 12 VDC
1662 3/4" NG Modulating Gas Valve Assy, PT-200FT LPG
1716 High Temp Sight Glass 2" x 2"
1749 Bimetal ECO 1/8" NPT @ 220 F +/- 7 auto reset at 170 F
1752 PT-200 Pressure Relief 3/4" X 3/4" Pressure only 150PSI
1765 Ignition Cable for PT-200 & PT-56 (Mod. As 1412)
1827 DSI Wiring Harness
1875 Blower Assembly for PT-200