Precor AMT 885 - Page 11

4
Required tools Hardware kit
•
#2 Phillips screwdriver
• Rubber mallet
• 7/16-inch open-end wrench
• SAE standard socket set
• Wire cutter
• Two #1 Phillips screwdrivers
• Torque wrench (including a
3/16-inch hex wrench bit)
Component Quantity Component Quantity
Nylon lock nuts (5/16-
inch)
6
Screw
(#10 x 1 1/4-inch)
10
Hex head bolts
(5/16-inch x 1-inch)
4
Flat head hex drive screws
(1/4-inch x 5/8-inch)
5
Hex head bolts
(5/16-inch x 3 1/2-
inch)
6
End caps
2
Bolt sleeve
2
Conduit (optional)
1
Flat Washer
(5/16-inch)
6