Assembling the Exercise Bike 23
Installing the Stabilizers
The two stabilizers containing the feet of the bike are
detached for shipment. Before performing any other assembly
tasks, bolt the stabilizers onto the main frame of the bike.
Note: The front stabilizer includes two wheels to assist in
positioning the bike.
To install the stabilizers:
1. Place the rear stabilizer underneath the bracket at the
rear of the bike.
Figure 2: Rear stabilizer installation
2. Secure the rear stabilizer using two M10 x 40 mm
buttonhead screws. Tighten the screws completely using
a 6 mm hex wrench.
Figure 3: Rear stabilizer attachment
To Next Page
Loading...
