Need help?Do you have a question about the Preiffer adixen ASM 380 and is the answer not in the manual?
Enables wireless communication via Bluetooth with PDA or PC.
Describes 4 options for I/O, including 37-pin I/O board.
Groups Profibus, Ethernet, Wi-Fi, and Sniffing Kit options.
Lists accessories common to all leak detectors like probes and spray guns.
Lists accessories specific to certain leak detector models.
Details measurement range, pumping speed, and analyzer cell specifications.
Covers startup time, power, temperature, and weight.
General safety information and user responsibilities.
Precautions for handling weight, tilting risks, and installation.
Warnings about electric shock, hazardous substances, and explosion risks.
Safety for maintenance, decontamination, and disposal.
Steps and checks for unpacking the equipment upon arrival.
Instructions for preparing the detector for shipping.
Recommendations for storing and safely moving the detector.
Explains the function and connection of purge and vent systems.
Properties of dry nitrogen and ambient air for gas purge.
Steps for installing the bottle holder kit and securing the bottle.
Procedures for installing 37-pin I/O boards (Standard, Ethernet, Wi-Fi).
Standard and optional interfaces for detector control (RS 232, USB, Bluetooth).
Mechanical and software compatibility of interfaces.
Exporting test tickets and data via PC connection.
Allows PC control via RS 232; describes connection.
How to allocate RS 232 to serial link 1 for activation.
Controls detector with PLC/external device, provides analog signal.
Details on inputs, outputs, ground, and headphones.
Controls detector with PLC/automaton, customizes valves.
Settings for digital inputs and various digital output types.
Configuring adjustable analog outputs for Mantissa, Exponent, Logarithmic.
Connecting to PC via USB, driver installation, and port allocation.
Steps to create and configure a Wi-Fi network connection.
Adjusting IP address for network compatibility and saving settings.
Connecting to detector via Ethernet, driver loading, IP configuration.
Pairing the remote control or PDA with the detector via Bluetooth.
Steps for first-time startup, parameter adjustment, and post-storage startup.
Steps for safely powering down the leak detector.
How to initiate, perform, and terminate a leak detection test.
Guide to control panel layout, application windows, and function keys.
Steps for conducting a hard vacuum leak test.
Steps for performing a sniffing leak test.
Explanation of the control panel's layout, touch screen, and keys.
Details on standard display, graphic display, vacuum circuit, and settings menu.
How to customize function keys for direct access to features.
Monitoring and recording signal and pressure evolution over time.
Adjusting display parameters and using automatic scale.
Recording measurements, viewing plots, and managing data.
Zooming on plots and saving recorded data to SD card.
Overview of menus for Set Points, Test, Spectro, Config., Maintenance, Advanced.
How to adjust values and understand menu icons and keys.
Setting reject points for hard vacuum and sniffing tests.
Configuring audio alerts and digital voice messages.
Setting He Max. value and probe clogged detection threshold.
Selecting between hard vacuum and sniffing tests, and modes.
Applying correction factors and controlling test cycle end.
Automatic air inlet at test end, manual activation.
Selecting tracer gas and understanding hydrogen background.
Calibrating with tracer gas and understanding filament margin.
Setting parameters for autocalibration using internal/external leaks.
Tracking pump timers, filament life, and cycle counts.
Logging and viewing detector events and calibration records.
Setting language, units, date, time, and function keys.
Customizing display windows and screen parameters.
Setting user levels and passwords for menu protection.
Configuring start-up time, background suppression, zero activation.
Performing calibration, autocalibration, and managing analyzer cell.
Saving data to SD card and exporting test results.
Overview of default settings for Set Points, Test, Spectro, Maintenance.
Guide to accessing Set Points, Test, Spectro, Config., Maintenance, Advanced menus.
Overview of remote control buttons, displays, and connection.
Using zero function, autocalibration, inlet vent, and sniffing test via remote.
Specifications and included items for the wireless remote control.
Understanding the display, basic functions, and main menu.
Steps for connecting and disconnecting the remote control wirelessly.
Recording measurements and managing data files (copy/delete).
Information on service center, overhaul, and repair processes.
Procedures for sending devices and placing service orders.
General| Brand | Preiffer |
|---|---|
| Model | adixen ASM 380 |
| Category | Security Sensors |
| Language | English |
To Next Page