METHODS OF INSPECTING MALFUNCTION
If any case of malfunction happens, please inspect and dispel it according to the methods shown in
the following table.
• Is there no electric current.
• Is the voltage normal or not.
• Has the socket fused.
• Has the plug been put in effectively.
• Is the thermostatic dial set to the correct position.
• Is there any suitable clearance surrounding the
refrigerator.
• Has the door been opened too frequently or too long.
• Is the refrigerator exposed to sunlight directly or placed
near some heating devices.
• Are there too much food inside.
• Or are too hot.
Food frozen in the refrigerator
Compartment
• Is the thermostatic dial set to the correct position.
• Have the foods stuff been put too crowded.
• Is the refrigerator installed firmly.
• Has the refrigerator been struck by some other objects.
Compressor Cannot stop
automatically
• Are the foods stored too much at one setting.
• Are the doors opened too frequently or too long.
To Previous Page