This document is a comprehensive "Use and Care Guide" for a patio furniture set, specifically identified as model CP003-16-7-GS007. The set includes a gas fire pit table, single fixed sofas, a 3-seater sofa, and ottomans. The guide provides detailed instructions for assembly, operation, safety, and maintenance of all components.
Function Description:
The product is a multi-piece outdoor patio furniture set designed for relaxation and entertainment. Its primary components are:
- Gas Fire Pit Table: A central feature for outdoor heating and ambiance, utilizing a propane gas cylinder to produce a flame. It serves as a focal point for gatherings.
- Single Fixed Sofas: Individual seating units designed for comfort.
- 3-Seater Sofa: A larger seating unit accommodating multiple individuals.
- Ottomans: Versatile pieces that can serve as footrests or additional seating.
The overall function is to provide a comfortable, aesthetically pleasing, and functional outdoor living space for users.
Important Technical Specifications (Gas Fire Pit Table):
- Fuel Type: Liquefied Propane Gas (LP-gas).
- Cylinder Requirement: Standard 20 lb. propane cylinder (not included).
- LP-gas Supply System: Propane vapor withdrawal supply system.
- Pressure Regulator and Hose Assembly: Must use the supplied components.
- Installation Codes: Must conform with local codes, or in absence of local codes, with National Fuel Gas Code, ANSI Z223.1, CSA B149.1, or Propane Storage and Handling Code, B149.2.
- Cylinder Construction: LP-gas supply cylinder must be constructed and marked in accordance with U.S. Department of Transportation (D.O.T) Specifications for LP-Gas Cylinders, or CAN/CSA-B339.
- Cylinder Features: Must have a collar to protect the cylinder valve and a listed overfill protection device (OPD).
- Cylinder Filling: Never fill beyond 80 percent full.
- Connection: CGA No.791IQCC connection for appliances.
- Gas Supply Pressure: 25 PSI to 250 PSI.
- Max. Gas Supply: 6791.3 in wC (1725 kPa).
- Manifold Pressure: 11 in wc (2.74 kPa).
- Ignition: Requires one AAA battery for the igniter.
- Burner: Inspected for damage, debris, and replaced if necessary with a dealer-specified replacement.
- Heat Shield: An important safety component preventing contact with the fire bowl when adjusting the propane valve.
Usage Features:
- Outdoor Use Only: The fire pit table is strictly for outdoor use.
- Initial Lighting: A slight odor may be present during the first use ("burn-in" period); run on high for approximately 30 minutes.
- Lighting Procedure:
- Ensure control knob is "OFF".
- Fully open LP cylinder valve.
- For initial start or cylinder change, hold Control Knob IN for 2 minutes to purge air.
- Push in gas control knob, turn counterclockwise to "LOW", and press the RED Ignitor button.
- Keep knob depressed and continue pressing ignitor until lit (clicking sound).
- Release knob once lit.
- Increase flame by turning counterclockwise to "HIGH"; decrease by turning clockwise to "LOW".
- If burner fails to remain lit, close all valves, wait 5 minutes, then retry.
- Shut Down Procedure:
- Depress control knob and turn clockwise to "OFF".
- Turn cylinder valve clockwise to "OFF" and disconnect regulator when not in use.
- Safety Features:
- Thermocouple safety: Do not bypass.
- Overfill protection device (OPD) on LP cylinder.
- Heat shield to prevent contact with hot surfaces.
- Assembly: Requires a Phillips head screwdriver (not included) and an M6 wrench (included). Bolts and nuts are provided for assembly.
- Fire Glass: Placed into the fire bowl, ensuring it does not cover the ignition portion of the burner.
Maintenance Features:
- Leak Testing: Must be performed annually or if any part of the gas system is replaced.
- Method: Use a 2-3 oz solution of one part liquid dishwashing soap to three parts water. Apply to hose/regulator and regulator/cylinder connections. Turn cylinder valve ON. Bubbles indicate a leak.
- Troubleshooting: Tighten connections or replace defective cylinder valve/hose assembly.
- WARNING: NEVER use an open flame to check for leaks.
- Cleaning:
- Keep the control compartment, burners, and circulating air passageways clean.
- More frequent cleaning may be necessary.
- Keep the appliance area clear and free from combustible materials, gasoline, and other flammable vapors and liquids.
- DO NOT OBSTRUCT combustion process or air ventilation flow.
- Keep cylinder enclosure ventilation opening(s) free from debris.
- Clean burner/venturi tubes for insects and nests.
- Clean burner orifices with a heavy-duty pipe cleaner.
- Clean burner with a wire brush for rust.
- Clean the emitter screen with a dry cloth if any carbon deposits develop.
- Storage:
- Turn control knob to "OFF" position.
- Disconnect LP source.
- Store heater upright in an area sheltered from direct contact with inclement weather (rain, sleet, hail, snow, dust, debris).
- If desired, cover heater to protect exterior surfaces and help prevent buildup in air passages.
- Wait until heater is cool before covering.
- Inspection:
- Inspect the heater before each use and at least annually by a qualified service person.
- Check for damaged parts (hoses, regulators, pilots, burners).
- Inspect the hose assembly for abrasion or wear.
- Ensure no debris (leaves, grass) has entered or is on the appliance.
- Repair: Installation and repair should be done by a qualified service person.
- Cushion Care: Cushions are removable for cleaning and storage.
Safety Warnings and Precautions:
- Carbon Monoxide Hazard: Appliance can produce carbon monoxide; never use in enclosed spaces (camper, tent, car, home).
- Fire/Explosion Hazard: If gas smell, shut off gas, extinguish open flames, leave area, call gas supplier/fire department.
- Flammable Materials: Do not store or use gasoline or other flammable vapors/liquids near the appliance. LP-cylinder not connected for use should not be stored nearby.
- Children Safety: Children and adults should be alerted to high surface temperatures. Young children must be carefully supervised. Keep children out of the assembly area. Do not allow children to play with plastic wraps or small parts.
- Clothing: Do not hang clothing or other flammable materials on or near the heater.
- Guards: Any removed guard or protective device must be replaced before operating.
- Damaged Parts: Never use a dented, rusted, or damaged propane cylinder or one with a damaged valve connection. Replace damaged burners or hose assemblies.
- Rain: Never use the appliance while raining. Turn off when raining.
- Modifications: Any modification to the appliance may compromise safety. Do not bypass thermocouple safety.
- Water Damage: If parts have been under water, call a qualified service technician to inspect and replace affected parts.
- Support: Never use the product as a support; do not shake, lean, or climb on it.
- Assembly: Do not completely tighten screws until all are started. Wear protective gloves. Two adults are required for safe assembly due to weight.
Warranty:
- Limited Warranty: 1-year limited warranty from the original purchase date for the original owner (proof of purchase required).
- Coverage: Frame is warranted to be free of manufacturing defects.
- Not Covered: Commercial use, hardware, acts of nature (fire, freezing), abusive use, purchased parts. The company reserves the right to substitute similar merchandise if the model is no longer in production.
The guide emphasizes the importance of reading all instructions thoroughly before installation, operation, and maintenance to prevent property damage, personal injury, or loss of life. Contact customer service at service@alphamarts.com or 1-877-606-2818 for questions, problems, or missing parts.
Need help?
General
To Next Page