Cutting Board
Attaches to the unit with a strong magnetic strip. Simply
guide the cutting board into the bottom of the unit and
the magnet will securely attach it. Lightly pull the board
before use to ensure that it is in place.
*Only the side that is upright when attached to the unit is
meant to be used as a cutting surface
Lids
With lids attached, attach to the large & XL containers
1. Optional prepping tools clip directly onto the large
container
2. When desired, inset a medium and small containers
inside the large prior to use
3
How To Use
Place the stand in the slot located on the back of the
Prepdeck unit
Make sure that the colored strip is facing up
Push down to lock it into place & it's ready for use
Mobile Device Stand
1.
2.
3.
support.prepdeck.com
To Next Page
Loading...