EasyManua.ls Logo

Prestige 350 - Engine Fitting

Default Icon
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
93/112
ENGINE FITTING
Engine
These instructions give detailed explanations on proper operation of the engine.
- Refill before the fuel tanks have almost run dry (the fuel system may be stopped for lack
of fuel).
- Make sure you have enough fuel before sailing.
Access to the engine
Access to the engine is obtained through the service compartment.
Engine water intake valve
If water does not flow out:
- Stop the engine immediately.
Regularly inspect and clean the seawater filter.
Engine operation
Before starting the engine:
- Turn on the fuel valve.
- Open the seawater inlet valve located by the housings.
- Operate the battery switches and energise the electric system.
- Disengage the reverse gear (it will make the acceleration possible when in neutral).
ADVICE - RECOMMENDATION
- Get used to checking immediately after starting the engine if water is expelled with the
exhaust gases.
WARNING
- Never switch off or de-energise the electric system when the engine is
running.
- Imperatively operate the stop pull handle (or button) before using the ignition
key to switch off a diesel engine.
9
ENGINE

Related product manuals