ELECTRONIC DIGITAL TIMER OPERATING INSTRUCTIONS
INSERT BATTERY BEFORE USING
1. Remove the battery compartment cover on the back of the
unit by sliding it in the direction of the arrow (Fig. A).
2. Insert one AAA battery into the compartment matching the +
and - symbols as indicated inside the battery compartment.
3. Replace battery cover, making sure it locks in place.
TO USE COUNT DOWN TIMER (Up to 99 MIN 59 SEC)
1. Press MIN and SEC buttons for desired timing period. Press
and hold the buttons for faster setting.
2. Press START/STOP button to begin timing. The “M” and “S”
on the display will flash when timer is in use.
3. To stop timing, press START/STOP button. To restart the
timer press START/STOP again.
4. After time elapses, alarm beeps for 30 seconds. To stop
the beeping, press either the MIN, SEC, or START/STOP
button.
5. To reset the timer to 00:00, press the MIN and SEC buttons
simultaneously.
TO USE TIMER MEMORY RECALL
1. After alarm stops sounding, the pre-set time will appear in the
display. Press the START/STOP button to count down again
using the same pre-set time.
Note: If you stop the timer while it is beeping and you want
to recall the pre-set time, simply press the START/STOP
button and it will appear on the display. Press the START/
STOP button a second time to count down again using the
same pre-set time.
TO USE COUNT UP/STOPWATCH
1. P
ress the MIN and SEC buttons simultaneously to reset to
00:00.
2.
Press the START/STOP button to start counting up in
seconds.
3. To interrupt the count, press the START/STOP button.
To resume counting, press the START/STOP button
again.
4. P
ress the MIN and SEC buttons simultaneously to reset to
00:00.
CLIP/STAND
Your clock/timer has a spring loaded clip on the back (Fig. B), so
you can clip it onto clothing or other things. The clip converts to
a stand by pressing down on top of the clip (above magnet) and
moving the timer slightly so the metal brace flips out and rests
on top of the two pegs on the clip to form an easel.
Clip converts to
stand. Spring-
loaded clip.
Magnet for
metal surface
attachment
Battery Cover
Fig. A
Fig. B
Metal brace rests on pegs
Consumer Service Information
If you have any questions regarding the operation of your Presto
appliance or need parts for your appliance, contact us
by any of these methods:
• Call 1-800-877-0441 weekdays 8:00 AM to 4:30 PM (Central Time)
• Email us through our website at www.GoPresto.com/contact
• Write:
National Presto Ind., Inc., Consumer Service Dept. 3925 N. Hastings Way, Eau Claire, WI 54703-3703
Inquiries will be answered promptly by telephone, email, or letter. When emailing or writing, please include a phone
number and a time when you can be reached during weekdays if possible.
Genuine PRESTO
replacement parts are manufactured to the same exacting quality standards as PRESTO
appliances and
are engineered specifically to function properly with its appliances. Presto can only guarantee the quality and performance
of genuine PRESTO
parts. “Look-alikes” might not be of the same quality or function in the same manner. To ensure
that you are buying genuine PRESTO
replacement parts, look for the PRESTO
trademark.
2011 National Presto Industries, Inc Printed in China Form 76-024A
PRESTO
LIMITED WARRANTY
This quality PRESTO
appliance is designed and built to provide many years of satisfactory performance under normal
household use. Presto pledges to the original owner that should there be any defects in material or workmanship during
the first year after purchase, we will repair or replace it at our option. Our pledge does not apply to batteries, if any, or to
damage caused by shipping. To obtain service under the warranty, return this PRESTO
appliance, shipping prepaid, to the
Presto Factory Service Department. When returning a product, please include a description of the defect and indicate the
date the appliance was purchased.
We want you to obtain maximum enjoyment from using this PRESTO
appliance and ask that you read and follow the
instructions enclosed. Failure to follow instructions, damage caused by improper replacement parts, abuse or misuse will
void this pledge. This warranty gives you specific legal rights, and you may also have other rights which vary from state to
state. This is Presto’s personal pledge to you and is being made in place of all other express warranties.
NATIONAL PRESTO INDUSTRIES, INC. Eau Claire, WI 54703-3703
76-024A 04213 Digital Timer bilingual Instr. indd 1 10/17/11 3:45:51 PM
To Next Page
General