41
1. Operating Instructions
(1) Make sure the power cord, charger and battery connector are in good condition.
(2) Make sure the output voltage of the charger is the same as the connecting battery.
(3) Connect the plug of the charger with the battery, and then plug the AC power plug
into the electricity outlet.
2. LED indicators:
Blue light on: Power on. Disconnect the battery.
Red light on: Charging.
Green light on: Fully charged.
3. Troubleshooting
(1) Blue light is off when power is on:
Check if the input power cord of the charger is plugged into the socket, and whether
electricity passes through from the outlet. If yes, please send the charger for repair.
(2) Red light is off during charging:
Check if the charger and battery connecters are connected correctly. If they have a
good connection, and the battery is not fully charged, the battery may be defective.
(3) Red light turns to green immediately:
Check to see if the battery is fully charged. If it is not fully charged, the charger may
be defective. Please send the charger back to the manufacturer for repair.
4. Caution
(1) For indoor use only. Do not expose to rain.
(2) Please switch off the power supply before removing the charger from the battery.
(3) Do not get close to explosive gases or sparks and put the charger in a well-ventilated
area during charging.
(4) Use the charger only with 36V (Vmax:42V) lithium batteries.
To Previous Page
Loading...