The PowerAssist is designed as an aid to a wheelchair attendant providing power to aid pushing in
otherwise strenuous situations such as up steep hills, etc.
The PowerAssist features some ingenious concepts to help the installation and operation of the
device. Some of these are covered by a pending patent.
The PowerAssist is designed to work in conjunction with most wheelchairs with seat widths between
16” and 22”.
The PowerAssist is to be controlled by an attendant with a manual wheelchair and user up to a
combined weight of 250lbs (115kg).
The PowerAssist uses a 12V 18AH battery pack, please use the WU’S charger only, and recharge
the battery to its full capacity every time.
INTRODUCTION
Manufactured by Wu’s Tech Co. Ltd.
3 Fl. No. 112 Sec. 2, Chung-Shan N. Rd., Taipei, Taiwan, R.O.C.
Imported by Pride Mobility Products Australia Pty. Ltd.
20-24 Apollo Drive, Hallam, Victoria, Australia 3803
Ph: 03 8770 9600
To Next Page
Loading...
