4. BATTERY INSTALLATION
Place the battery pack in to the battery
bracket as shown in the photograph.
5. FINAL CONNECTION
a. Connect the cable from the powerpack in to the
underneath of the handset. Place the top loop of the
lift-up strap around the opposite push handle to the
handset.
b. Connect the cable form the battery pack in to the
system connecter.
c. Place the top loop of the lift-up strap around
the opposite push handle to the handset.
d. Loose the screw at the frame rstly. Then adjust
the battery pack height by sliding the frame.
To Next Page
Loading...
