Prior to First Use
• All parts of the unit should be thoroughly cleaned before first
use (see Section: Cleaning)
• Before inserting the Cup to the housing, ensure that the
power cord is plugged in and the speed knob is set to '0'.
How to Use
Using the Food Processor
• When you use the food processor, ensure that the
BLENDER CUP (4) is released. Place the LID (9) on CUP 2
(10) and turn clockwise until you hear it lock into place. Place
the lid (16) onto blender base (6) to cover the drive
mechanism.
• To chop the food into strips: Place the BLADE TRAY (11)
to the ROTOR (15). Place the prepared food in the CUP (10)
and set to the desired speed (5). Press the PUSH COVER
(8) downward until the food is completely chopped.
• To chop the food into pieces: Place the BLADE TRAY (11)
to the ROTOR (15) (inverse of strip blade). Operate the
same way as chopping into strips.
• To chop hard pieces of food: Place the STAINLESS
STEEL BLADE (12) onto the ROTOR (15) and operate same
as above.
• To mix the food: Place the PLASTIC BLADE (14) onto the
ROTOR (15) and set to the desired speed.
To Next Page
Loading...