*EN 50242 : This programme is the test cycle. The information for comparability test
in accordance with EN 50242, as follows:
Capacity: 12 settings
Position Upper basket: upper wheels on rails
Rinse aid setting: 6
Pl:0.49w; Po:0.45w.
Means: need to fill rinse into the Rinse-Aid Dispenser.
( )
13
Starting a cycle wash
1 Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the upper one (see the section entitled
Loading the Dishwasher ).
2 Pour in the detergent (see the section entitled Salt, Detergent and Rinse Aid ).
3 Insert the plug into the socket. The power supply is 220-240 VAC /50 HZ, the specification
of the socket is 10A 250VAC. Make sure that the water supply is turned on to full pressure.
4 Open the door, press the ON/OFF Button, and the indicator will light.
5 Press the program Button , the wash program will be changed as follows direction:
If a program is selected, the indicator will light. Then close the door, the dishwasher
begins to start.
“ ”
“ ”
Intensive->ECO->90mins->Rapid;
Intensive
Rapid
90 mins
For heaviest soiled crockery,
and normally soiled pots
pans dishes etc with dried
on soiling.
、
、
For lightly soiled loads that
do not need excellent drying
efficiency.
A shorter wash for lightly soiled
loads and quick wash.
170
1.6
18.5
(1 or 2pieces)
5/25g
Prewash 50
Wash 60
Rinse
Rinse
Rinse 70
Drying
（ ℃ ）
（ ℃ ）
（ ℃）
Prewash
Wash (45 )
Rinse(65 )
Drying
℃
℃
190
0.90
11
Wash(65 )
Rinse
Rinse (65 )
Drying
℃
℃
90
12.51.35
Wash (45 )
Rinse (50 )
Rinse (55 )
℃
℃
℃
30
0.75
11
This is standard programme, it is
suitable to clean normally soiled
tableware and it is the most efficient
programme in terms of its combined
energy and water consumption for
that type of tableware.
25g
(1 piece)
30g
(1 or 2pieces)
5/25g
To Next Page
Loading...
