EN
Página 7 de 43
Settings/values: Display of settings and true values for the current cycle
(Temperature, Level, Time remaining).
Allows setting values to be edited, but is only effective for currently running
programme.
Manual dosing: This section can be accessed, the state of each dispenser (ON /OFF)
is displayed, and the required dose can be activated/deactivated. The available options will
be based on the configuration of existing kits. On exiting the dosing window, all the
dispensers are deactivated.
Manual water inlet: This section can be accessed, the state of each water inlet (ON
/OFF) is displayed, and the required inlet can be activated/deactivated. The water inlet that
has been activated by the fill logarithm cannot be deactivated. On exiting the water inlet
window, all the manually activated water inlets will be deactivated.
To Next Page
