Need help?Do you have a question about the Primo Water hTRIO and is the answer not in the manual?
General| Water Source | Bottled Water |
|---|---|
| Dispensing Method | Push Button |
| Capacity | 3 or 5 Gallon Bottles |
| Power Source | Electric |
| Voltage | 120V |
| Wattage | 420W |
| Water Temperature Settings | Hot, Cold |
| Color | Black |
| Safety Features | Child Safety Lock |
| Material | Plastic, Stainless Steel |
Removable tray for organizing single-serve brewer pods. Pods sold separately.
On/off switches for heating, cooling, and nightlight located on the back.
Controls for single-serve beverage dispensing, allowing selection of 6, 8, or 10 oz serving sizes.
Indicator light that blinks red when the water bottle is empty and needs replacement.
Indicator light that flashes while water is heating and stops when fully heated.
Drawer for brewing single-serve beverage pods; press gray button to remove.
Paddle control to dispense cold water by pressing a glass or container against it.
Paddle control with child-resistant feature to dispense hot water.
Assembly that pumps water from the bottle into the hot and cold reservoirs.
Hanger inside the cabinet door to keep the probe assembly clean.
Removable and dishwasher-safe drip tray with a red indicator for emptying.
Information on compatible water bottle sizes (11.3 or 18.9-liter) and where to find them.
Instructions for dispensing cold water, noting it takes about 1 hour to chill initially.
Instructions for dispensing hot water, including child-resistant feature and initial heating time.
Steps for preparing single-serve beverages using K-Cup pods, including drawer operation and serving size selection.
Guide on how to use the reusable coffee filter for brewing beverages.
Procedure for replacing the water bottle when the empty bottle light is flashing.
Recommendations for regular cleaning of the dispenser's parts for optimal performance and hygiene.
To Next Page
