Safety Precautions And Warnings
To prevent personal injury or damage to vehicles and/or the Scan Tool, read this instruction
manual first and observe the following safety precautions at a minimum whenever working
on a vehicle:
Always perform automotive testing in a safe environment.
Wear safety eye protection that meets ANSI standards.
Keep clothing, hair, hands, tools, test equipment, etc, away from all moving or hot engine
parts.
Operate the vehicle in a well-ventilated work area; Exhaust gases are poisonous.
Put blocks on drive wheels and never leave vehicle unattended while running tests.
Use extreme caution when working around the ignition coil, distributor cap, ignition wires
and spark plugs. These components create hazardous voltages when the engine is running.
Put transmission in PARK (for automatic transmission) or NEUTRAL (for manual
transmission) and make sure the parking brake is engaged.
Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
Don’t connect or disconnect any test equipment with ignition on or engine running.
Keep the Scan Tool dry, clean and free from oil, water and grease. Use a mild detergent on a
clean cloth to clean the outside of the Scan Tool, when necessary.
Ideal operating Temperature: 0 to 50°C (-32 to 122 F°) Storage Temperature: -20 to 70°C (-4
to 158 F°)
Product Features
1. The OBDII programing of this test tool works with most 1996 and newer cars & light trucks
that are OBD II compliant (including the CAN, VPW, PWM, ISO and KWP 2000 protocols).
2. Reads and clears generic and manufacturer specific Diagnostic Trouble Codes (DTCs) and
turns off check engine light
3. Supports multiple trouble code requests: generic codes, pending codes and manufac-
turer’s specific codes
4. Reviews the emission readiness status of OBD monitors
5. Retrieves VIN (Vehicle Identification No.) on 2002 and newer vehicles that support Mode 9
6. Determines the malfunction indicator lamp (MIL) status.
7. Easy to use with one plug-in; highly reliable and accurate
8. Easy-to-read crystal-clear backlit 2-line LCD display
9. Stand-alone unit with no need for an additional laptop computer to operate
10. Small in size and conveniently fits in your palm
11. Safely communicates with the on-board computer
12. No batteries needed--powered via detachable OBD II cable
To Next Page
Loading...