Princess Dinner4Two Pure - Page 5

Instruction manual
5
• Putthepower cable intothe socket.(Note: Make surethe
voltagewhich is indicated on the devicematchesthe
localvoltage beforeconnecting the device.Voltage220V-240V
50-60Hz).
• When the device is turned on for the first time, a slight odour will
occur. This is normal, ensure adequate ventilation. This smell is
only temporary and will soon fade.
• We advise to place a heat resistant coating between your table
and the appliance (this way you don't get burn marks on your
table or table cloth).
• Place the device in a well ventilated space.
ASSEMBLY OF THE GRILL PLATES
Illustration1: Place baking plate
Illustration2: Press to fasten
To assemble the grill plates follow the steps below:
1. To attach the grill plate to the base, put the pins in the mounting
clips in an angle of 20°. (See illustration 1)
2. Gently press the grill plate down. Use one hand to steady the
plate at the mounting side, use the other to press it down until you
hear a click. (See illustration 2)
3. To remove the grill plate, press the release button.
You can connect multiple main units to each other.
• On the front side of the main unit you can plug in the power cord.
EN