Instruction manual
5
• Press and hold the power button for some seconds to turn the
appliance on.
• This is an air fryer that works on hot air. Do not fill the pan
with oil or frying fat.
• In order to prevent disruptions of the airflow do not put
anything on top of the appliance and make sure there is
always 10 centimeter of free space around the appliance.
• NOTE: After the baking process the appliance needs to cool
down, this cooling process will activate automatically when
the timer is done. Please avoid to unplug the appliance from
the net-socket before the cooling process is finished
because the remaining hot air can damage the appliance.
USE
• Put the mains plug in an earthed wall socket.
• Carefully pull the pan out of the air fryer.
• Put the ingredients in the pan, make sure the removable grid is
placed in the pan before you put in the ingredients.
• Slide the pan back into the air fryer.
• Do not touch the pan during and some time after use, as it gets
very hot. Only hold the pan by the handle.
• When the pan is cold, please warm up the pan for 5 minutes on a
temperature of 80 degrees. After this, the device is ready for use.
• There are 8 frying programs included: Meat, Chicken, Shellfish/
Crustaceans, Fish, Pizza, Aerofryer Fries, Bake and Vegetables.
Use the preset button to select the desired program.
• Press and hold the power button for some seconds, the Aerofryer
will start the corresponding program. When you have chosen the
wrong program, you can abort by pressing the power button
again. The device will stop after 20 seconds. After this you can
select another function. It is also possible to adjust the chosen
program by changing the time and temperature.
• The time can be adjusted with the timer control buttons. Press
the timer control buttons one time to increase or decrease the
frying time by one minute. Press and hold one of the buttons to
adjust the time faster. You can set the timer between 1 and 60
minutes.
• The temperature can be adjusted with the temperature control
buttons. Press the temperature control buttons one time to
increase or decrease the temperature by 5 degrees. Press and
hold one of the buttons to adjust the temperature faster. You can
set the temperature between 80 and 200 degrees.
• It is also possible to start the device without selecting a function.
Set the time and temperature with the timer and temperature
control buttons, then press the power button.
• When you pull out the pan during the frying process, the device
will shut off automatically. When you reinsert the device, the
program will resume.
• To cancel any program, press the power button. The device will
shut off after 20 seconds.
• During the hot air frying process, the heating-up light comes on
and goes out from time to time. This indicates that the heating
element is switched on and off to maintain the set temperature.
• Excess oil from the ingredients is collected on the bottom of the
pan.
EN
To Next Page
Loading...
