Remove the filter components and wash them.
Note: HEPA filter is not washable, Just shake off the dust gently.
Sun-fire the dust box and filter
material to ensure its use life
Remove the dust box
and clean up the garbage.
HEPA filter
Clean up the suction inlet
when with too much dust. Please
use cloth to clean it
Clean brushes: use a screwdriver
to remove the side brushes, clean
the foreign matter on the side
brush
Remark: The user should clean the
dust box and filter
material in time to keep
the machine in good condition
Using instruction
1. The right and left side brushes (as shown above in the center color) are not
interchangeable.
2. In order to ensure good use effect, users should clean the surrounding hair and other
debris in time after using the machine for a period of time.
3. The user should change the side brush according to the diagram left and right. (use a
screwdriver to remove the fixed screw and side brush, then fix the side brush for
replacement).
4. Please use care in the areas with too much hair or other winding things.
4. Maintenance
4.1 Dust Box & Filter Material
4.2 Cleaning Cloth
Clean and dr y the cleaning cloth after wet cleaning finished
4.3 Suction Inlet & Side Brush
4.4 Other Parts
Clean the anti-drop sensor to keep the sensitivity of inductor.
Clean the signal window for better avoidance.
anti-drop sensor
anti-drop sensor
anti-drop
sensor
signal window
anti-drop
sensor
To Next Page
Loading...
