PRM 150 User Manual

Covers warranty claims, service parts, and pre-delivery inspection procedures.

Details on power ratings, gear ratios, dimensions, weight, oil capacity, and installation parameters.

Details on the gearcase construction and the input, layshaft, and output gear assemblies.

Description of the oil pump, valve block, and neutral safety switch.

Details on oil flow, clutch actuation, lubrication, and approved oil types.

Procedures for checking engine flywheel/housing and mounting the gearbox.

Critical steps for aligning the propeller shaft, installation angle, and fitting the oil cooler.

Considerations for twin engines and remote control system integration.

First-time use, drive selection, trailing, and emergency operation instructions.

Details on initial, daily, annual, and other maintenance tasks.

A diagnostic table for troubleshooting common gearbox issues.

Safety, cleaning, inspection of parts, and component replacement procedures.

Detailed steps for repairing specific assemblies like the selector valve and oil pump.

Lists special tools, tightening torques, and contact details for ordering parts.

Parts listings for gearcase, oil pump, selector valve, and input shaft assemblies.

Parts listings for the layshaft and output shaft assemblies.