Need help?Do you have a question about the Pro Audio AIR Series and is the answer not in the manual?
General| Configuration | 2-Way |
|---|---|
| Tweeter Size | 1 inch |
| Woofer Size | 8 inches |
| Driver Configuration | Woofer/Tweeter |
| Enclosure Type | Bass Reflex |
Provides essential safety guidelines for operating the unit.
Details safety measures for installation and operation to prevent hazards.
Introduces the AIR series passive speakers and their general specifications.
Explains how to mount the loudspeakers using an optional bracket.
Details the procedure for mounting speakers using the standard included bracket.
Rear panel details for AIR04T and AIR04X models.
Rear panel details for AIR06T and AIR06X models.
Rear panel details for AIR08T and AIR08X models.
Rear panel details for AIR08TCOAX and AIR12TCOAX models.
Illustrates a basic setup connecting AIR speakers with an ARK amplifier.
Shows a setup with one passive subwoofer and multiple AIR speakers linked to an amplifier.
Depicts a configuration using a DP2000 amplifier with AIR series loudspeakers.
Guidance on connecting audio sources to amplifier inputs using signal cables.
Instructions for connecting amplifiers to loudspeakers using power cables.
Details the male and female XLR connectors used for audio signal input and output.
Steps to resolve issues related to the unit not receiving power.
Guidance on diagnosing and fixing problems when no sound is produced.
Advice on how to address sound distortion issues, often related to input levels.
Explains how to troubleshoot uneven sound levels between channels.
Tips for eliminating unwanted noise or hum from the audio system.
Explains loudspeaker efficiency and its impact on sound output volume.
Discusses loudspeaker impedance and its electrical characteristics affecting sound.
Provides guidance on selecting an appropriate amplifier based on speaker specifications.
Covers input sensitivity, sound clipping, and methods to prevent distortion.
To Next Page