8
The Pro Charging Systems’ new Auto Voltage Detection Eagle
Performance Series Charger has the ability to charge both and
battery packs.
There are no extra settings or congurations needed — just attach the
Auto Voltage Detection Charger to the battery pack and it will
automatically begin to charge to the correct voltage.
If the Auto Voltage Detection Charger is attached to a very discharged or low voltage 48V
battery pack, the charger may assume it is on a 36V battery pack. In this circumstance,
once the battery voltage reaches what would be considered fully charged for a 36V pack,
the charger will shut o. At this point the charger’s AC power should be cycled. This allows
the Auto-Detect to realize it is attached to a 48V pack and charge as it should.
*Please check the next page for
the interchangeable charge
cables that are available for the
Auto Voltage Detect Eagle
Performance Series.
To Next Page
Loading...
