The PRODG i 603 A is a versatile, active 2-way loudspeaker system designed for professional digital generation applications. It functions as an all-purpose speaker suitable for various audio needs, including live performances, presentations, and general sound reinforcement.
Function Description:
The i 603 A is an active loudspeaker, meaning it has a built-in amplifier. It features multiple input channels, allowing for the connection of microphones, instruments, and line-level audio sources. The speaker is equipped with a 2-band channel EQ (Treble and Bass controls) and a Reverb effect, providing users with tools to shape their sound. It also includes Bluetooth and TWS (True Wireless Stereo) functions for wireless audio streaming and creating a stereo sound setup with another i 603 A unit. The system is designed for portability and can be used with a rechargeable lithium-ion battery for up to 6 hours of operation at normal volume, making it suitable for outdoor or remote applications where power outlets may not be readily available.
Important Technical Specifications:
- Power Handling: 150 W RMS (EIA 426A Standard) / 300 W program / 600 W peak
- Nominal Impedance: 4 Ohm
- Average Sensitivity: 97dB / 2.83V / 1m (average of 150-16.000 Hz wideband)
- Maximum SPL Calculation: / 1m 110 dB continuous / 113 dB program / 116 dB peak
- Frequency Range: +/-3 between 60 Hz - 18 kHz
- Nominal Directivity: 120° of horizontal coverage, 90° of vertical coverage
- Low / Mid Frequency Driver: One (1) speaker of 6.5", 1.5" voice coil
- High Frequency Driver: Three (3) speakers of 2.75" with neodymium magnet, 1" voice coil
- Amplifier: Last generation Class-D amplifier
- Rigging Points: 2 x M8
- Connectors: 2 XLR / Jack input channels with mic and line switch + XLR Link
- Controls: 3 Mixer Channels and 2 Mic Preamps, 2-Band Channel EQ, Reverb effect, Bluetooth & TWS function
- Power Supply: 110~240V 50/60HZ
- Battery: Rechargeable Lithium-ion battery 2600mAh (up to 6 hours of use in normal volume)
- Acoustic Enclosure: Reinforced polypropylene plastic
- Finish: Special paint finish in black
- Grille: 1.5mm thickness metal grille with 0.5mm acoustic foam
- Mounting Options: 35mm pole mount, Tilt-back (30° angle), Floor Monitor (45° angle), Wall or ceiling mount with bracket
- Cabinet Dimensions (HxWxD): 235x250x290mm (9.25”x9.84”x11.42”)
- Weight: 7.25 Kg (15.98 lbs) net / 8 Kg (17.64 lbs) with packaging
Usage Features:
- Input Flexibility: The i 603 A offers two combo XLR/Jack input channels, each with a mic/line switch, allowing direct connection of microphones (XLR) and instruments (TS unbalanced) or line-level sources. An additional XLR input is provided for connecting line sources from a mixer or audio interface for both left and right channels.
- Sound Shaping: Dedicated Treble and Bass controls enable users to adjust the high and low-frequency balance of their audio. A Reverb control adds depth and ambiance to the sound.
- Signal Monitoring: A Signal/Clip indicator provides visual feedback on the input signal status, turning green for signal present and red for signal clipping, helping users prevent distortion by adjusting volume levels.
- Wireless Connectivity: Bluetooth pairing allows for wireless streaming from compatible devices like mobile phones, tablets, and laptops. The TWS (True Wireless Stereo) function enables two i 603 A units to be paired wirelessly for a stereo sound experience.
- Output Options: A ¼" TRS Line Output allows for connecting the i 603 A to the input of a second i 603 A to create a mono, two-loudspeaker setup. This output is post-mix, meaning it sends the processed signal.
- Portability and Mounting: The compact and lightweight design, combined with a built-in rechargeable battery, makes the i 603 A highly portable. It offers multiple mounting options, including a 35mm pole mount, tilt-back for stage monitoring (30° angle), floor monitor (45° angle), and compatibility with an optional wall/ceiling mount bracket.
- Select Switch: A dedicated switch allows users to select between guitar or microphone input modes, optimizing the sound processing for the chosen source.
Maintenance Features:
- Durable Construction: The acoustic enclosure is made of reinforced polypropylene plastic with a special black paint finish, designed for durability and protection. The grille is a 1.5mm thick metal with 0.5mm acoustic foam, further protecting the drivers.
- Cleaning: The device should be cleaned only with a dry cloth.
- Environmental Protection: Users are advised not to use the product near water and to ensure no humidity enters the box if used outdoors.
- Ventilation: It is crucial not to block any ventilation openings to ensure proper heat dissipation and prevent overheating.
- Power Cord Protection: The power cord should be protected from being walked on or pinched, especially at plugs, convenience receptacles, and where it exits the product, to prevent damage and ensure safety.
- Servicing: All servicing should be referred to qualified personnel, particularly if the product has been damaged (e.g., damaged power cord/plug, liquid spillage, exposure to rain/moisture, dropped, or not operating normally).
- Storage: Unplug the product during lightning storms or when unused for long periods to prevent potential damage.
Need help?
General
To Next Page