Pro-face GP-3750T - Page 29

29 / 29
iv. Click [OK] to confirm the setting.
v. Click [Project]->[Save] to save changes.
vi. Check each function that uses the CF card and replace the setting of [SD
Card] with the one of [USB Storage].
NOTE
To check each function setting of GP-Pro EX, refer to GP-Pro EX
Reference Manual.
(2) Check and change the destination folder setting following the steps below.
i. Click [Project]->[Information]->[Destination Folder].
ii. The current setting is displayed.
iii. After changing it, click [OK] to confirm the setting.
iv. Click [Project]->[Save] to save changes.