Need help?Do you have a question about the Pro-face PFXSP5B41 and is the answer not in the manual?
General| Product Type | HMI |
|---|---|
| Backlight | LED |
| Power Supply | 24 VDC |
| Operating Temperature | 0 to 50 °C |
| Storage Temperature | -20 to 60 °C |
| Protection Rating | IP65 |
| CPU | 32-bit RISC |
| Display Size | 5.7 inches |
| Resolution | 320 x 240 |
| Display Type | TFT |
| Touch Panel | Analog Resistive |
| Serial Interface | RS-232C |
| Ethernet | 10/100 Mbps |
| USB | No |
| Memory | 512 KB |
Read instructions carefully, be familiar with the device, and heed warnings.
Electrical equipment should only be installed by qualified personnel. Schneider Electric is not liable for improper use.
Outlines the process of installing the Box Module onto a Display Module or DC Power Supply Adapter.
Details DANGER and NOTICE for electric shock, explosion, and equipment damage during installation.
Step 1: Pull the LOCK forward on the top of the Box Module to release it.
Step 2: Insert protruding points on the Box Module into holes on the Display Module/Adapter.
Step 3: Fully push the LOCK on the top of the Box Module to mount it.
Outlines the process of removing the Box Module from a Display Module or DC Power Supply Adapter.
Details DANGER and CAUTION for electric shock, explosion, and injury during removal.
Step 2: Release the LOCK on the top of the Box Module to prepare for removal.
DANGER for potential explosion; verify wiring, avoid live circuits, remove power, secure cables.
To Next Page
