Need help?Do you have a question about the Pro-Ject Audio Systems Phono Box S3 B and is the answer not in the manual?
General| Input Capacitance | 100 pF |
|---|---|
| Gain (MM) | 40 dB |
| Gain (MC) | 60 dB |
| Input | RCA |
| Output | RCA |
| Frequency Response | 20 Hz - 20 kHz |
| Input Impedance | 47 kOhm |
| Output Impedance | 100 Ohm |
| Signal-to-Noise Ratio (MM) | 80 dB |
| THD (MM) | < 0.01% |
| Input Sensitivity (MM) | 2.5 mV |
Important warnings regarding electrical hazards, liquid contact, naked flames, and unsuitable locations for use.
Instructions for making connections, channel identification, and avoiding incorrect input connections.
How to connect the tonearm signal lead and grounding wire to the phono amplifier.
Connecting the phono amplifier's output to a line input on the main amplifier.
Connecting the unit to the mains power and how to turn it on/off.
Selecting between balanced (XLR) or unbalanced (RCA) input for turntables.
Adjusting input impedance, capacitance, and gain for different cartridges.
Enabling or disabling the subsonic filter and its indicator LED.
Detailed technical parameters of the Pro-Ject Phono Box S3 B.
Common issues like no signal, hum, or distorted output and their causes.
Guidance on seeking service and manufacturer's warranty information.
To Next Page